Description

All-in-one standing desk
The next evolution of clean: meet E7 Flow
E7 Flow delivers a truly clutter-free setup by integrating the power system directly inside the lifting columns.
The breakthrough
FlexiSpot’s first in-column power supply. The electrics sit inside the legs, so the desk arrives clean and stays clean.
The uncompromised legacy
The signature dual-motor stability and weight capacity of the E7 Pro series, kept intact. Nothing was traded away to make room for the power system.
Flexispot first
In-column power design
FlexiSpot’s first integrated in-column power supply, for cleaner and more seamless cable management. Enhanced lifting columns deliver superior stability compared to conventional inverted-column designs.
Compared to others
Drag to see the difference
The same desk, with and without the internal cable tray and power strip.


E7 FlowOthers
Inherited on proven performance
The frame that earned its reputation
Advanced dual motors, balanced twin beams, a sturdy C-shaped leg and reinforced thicker walls — carried over from the E7 Pro series rather than redesigned around the new power system.

Cable management
Internal cable tray and power strip
The tray and power strip are built in, not bolted on afterwards. Plug your monitor, laptop and lamp into the desk itself and raise it without a single cable pulling.

Flow state
From distraction to focus
Everything powered from one desk, moving as one piece. Fewer things to look at, fewer things to trip over, fewer reasons to stop working.

Performance
180kg and 50mm per second
Enhanced lifting columns deliver unmatched stability for your workspace, and lift a fully loaded desk quietly — under 45dB, so a call carries on while the desk moves.


Engineered for maximum stability
Steady where it matters
Thicker outer tubes and a reinforced leg keep the desk solid at full height, where a standing desk is usually at its weakest.

Your experience first. Always.
E7 Flow is not just a standing desk, it is your command centre. Easy to use, safe, and immersive — for productivity, creativity and well-being.
Effortless control
Touch LED panel with USB-C
Touch screen with a digital height readout, memory presets, anti-collision and position lock. A 20W USB-C port is built into the panel, so a phone charges from the desk.

Signature ErgoEdge
MDF tabletop, beveled edge
The Volcano Grey top is MDF finished with an electrostatic powder coating — water-resistant and easy to clean. 22mm thick, in 140 × 80cm and 160 × 80cm.

Crafted for comfort
Ergonomic beveled edge
The bevel is cut into the board, not a strip glued on, so there is no seam to lift over time. Your forearms rest on a soft angle instead of a square corner.

Limited Colours, Only in E7 Flow
Volcano Grey — Subtle. Sophisticated. Striking.
Like a stallion in the morning mist — composed, swift and strong. A refined grey that brings depth and quiet strength to your workspace.
Fuji White — Pure. Calm.
Inspired by Mount Fuji bathed in the soft, warm light of the morning sun, this gentle shade of white captures the quiet majesty of a new day.



Also available
MFC tabletop option
If Volcano Grey is not your finish, E7 Flow also takes the same MFC tabletop used across the E5 and E7 Pro range — 25mm thick, in three sizes and four colours.
120 × 75cm 150 × 75cm 180 × 75cm
Four colours: Zen, Maple, Walnut and White. Price adjusts with your tabletop selection.
Seen in real homes
E7 Flow fits naturally into everyday life, adapting to real routines, real spaces and real homes.









Image credits: @LG, @jck1634, @Riccardo Palombo, @PCGH, @les joies du code, @CHIP. Photos show previous E7 Flow units.
Product Specification
| Lifting Mechanism | Electric dual motor (2 motors) |
|---|---|
| Number of Leg Stage | 3-stage |
| Height Adjustment Range | 657–1257mm (65.7–125.7cm), including tabletop |
| Lift Speed | 50mm/sec |
| Weight Capacity | 180kg |
| Frame Width Range | 1100–1900mm |
| Memory Preset | 4 presets |
| Anti-Collision | Yes |
| Safety Child Lock | Yes (position lock) |
| USB Port on Control Panel | USB-C, 20W fast charge |
| Noise Level | <45dB |
| Cable Tray | 280 × 60 × (640–900)mm, max load 2.5kg. Included in Package 2 with the desk frame. |
| Power Distribution Unit | 465 × 52 × 56mm. Rated 250V AC, max 13A, max 3120W. Included in Package 2 with the desk frame. |
| Desktop Option (Material | Size | Color) | MDF with powder coating, beveled edge | 140 × 80cm / 160 × 80cm, 22mm thick | Volcano Grey MFC | 120 × 75cm / 150 × 75cm / 180 × 75cm, 25mm thick | Zen / Maple / Walnut / White |
| Warranty | Up to 10 Years extended Warranty |


































































































































































































































































































































































































































Rock solid, super smooth, and stays completely steady even at max height. Easily one of the best upgrades I’ve made.
I bought – FlexiSpot E7 Pro Electric Height Adjustable Table 180x75cm Zen. Use it as overbed table for my queen size bed. Got someone to fix it for me instead. Everything works ok but don’t keep adjusting up and down as you will get error and from manual it says wait 18 mins later then adjust. I just turn off the power and on – fast way. The magnetic cable cover is faulty so getting that replaced as one side, the magnet is super weak and can’t close. Overall, I’m happy because I’ve been hunting for a long time for a table that can be raised super tall for my overbed setup.
Just received my FlexiSpot E7 Pro today. Set up was easier than expected, and it feels really solid and stable. Loving it so far!
I have spent a week with the E7Pro Standing Desk and I think that is enough time to form my initial impression.
Starting off with the material:
1. Tabletop: I customised my desk with a solid wood tabletop. It smells amazing and I can immediately tell it is of good quality. I chose this over the standard MFC board for its durability and peace of mind.
2. Frame: The frame is extremely sturdy and the motor is surprisingly quiet. Truth be said, at standing height, it does wobble slightly, but that is just physics. I have also added on the caster wheels for added mobility which will come in handy when needed.
Flexispot offered a wide range of complimentary items unlike other brands where every component is an add-on with extra charges.
Last but not least, I would like to applaud Ms. Nazwa who has been extremely professional and helpful throughout our engagement. I was a questionnaire and posed many questions which she answered satisfactorily.
I am incredibly pleased with my purchase and I am confident this will not be my last Flexispot purchase.
Excellent flexispot desk ! Very quiet and stable when adjusting.i bought the 1.8m dark color top .highly recommend.
Really happy with this desk. It’s sturdy, smooth, and quiet when adjusting the height. It easily handles my dual-monitor setup without any wobble. Definitely worth the investment!
Really got surprised me. I never expected that the motors are so quiet and smooth. Overall built quality is solid especially the frame and the magnetic cover for cable management is need and tight.
Flexispot adjustable desk is not difficult to install, adjusts height smoothly, feels strong and stable, and helps make working or studying more comfortable, reducing strain from sitting too long.
The product is VERY solid and is way way better than ikea table, quite stable while in both sit and stand mode.
The FlexiSpot E7 Pro has transformed my work setup. Its motor height adjustment are pretty fast and had no real issues with stability, albeit the heaviest object I’ve placed is a laptop. After using it daily, I can confidently say it’s been a total gamechanger for work, improving my comfort and productivity in ways I didn’t expect.
Note: do not place your chair under the desk when it is moving downwards