If you are shopping for a standing desk in Malaysia, the hard part is not finding one. It is working out which specification actually matters and which is marketing. This guide compares the four electric standing desks we stock, with the real numbers side by side, so you can match a desk to how you work rather than to a price tag.
We are Igreen Office Furniture, the authorised FlexiSpot dealer in Malaysia. Everything below is a desk we sell, deliver and service ourselves, so treat this as a buyer’s guide to our range rather than a survey of the whole market.
What actually matters when buying
1. Motor count
A single-motor desk drives both legs from one motor. It costs less and handles a laptop and one monitor without complaint. A dual-motor desk gives each leg its own motor, so the top lifts faster, stays level when the weight sits mostly on one side, and carries more. Two or three monitors, or a desktop tower, means dual motor.
2. Leg stages
A 2-stage leg has two sections. A 3-stage leg has three. The extra section lets the leg fold up shorter and extend higher, so one desk covers more heights. The difference shows at the bottom of the range, which is where most desks fall short.
3. The minimum height, not the maximum
Nearly every desk reaches a comfortable standing height. Far fewer come down low enough to sit at properly. The right sitting height puts the desktop at your elbows with your shoulders relaxed. For someone around 5 feet tall, that is below the standard desk height, and most desks on the market stop between 700 and 750mm.
4. Weight capacity
The rating covers the tabletop as well as everything on it, and the top alone is 17 to 26kg depending on size. Read the number with that in mind.
5. What you get for the price
Check whether the tabletop is included. A frame-only price looks competitive until you add a top. Every desk in this comparison includes a 25mm tabletop.
The four desks compared
Essential EN1/E2 — RM699
Single motor, 2-stage legs, 740 to 1185mm, 80kg. The cheapest way into a real electric sit-stand desk. Lift speed is 15mm/sec, which is noticeably slower than the rest, and the height range is the narrowest here. For a home study, a second desk, or a first try at standing while you work, it does the job.
Best for: tight budgets and light setups.
EF1 Value — RM1,199
Single motor, 2-stage legs, 735 to 1235mm, 70kg. Our long-standing best seller. Faster than the Essential at 25mm/sec, with a taller maximum, four presets and a USB charging port on the keypad. The 70kg capacity is the lowest of the four, so it suits a clean desk rather than a loaded one.
Best for: one or two monitors and a tidy workspace.
E5 — RM1,299
Dual motor, 3-stage legs, 625 to 1275mm, 100kg. The newest desk in the range and, for most people, the one that makes the most sense. It is RM100 more than the EF1 and that buys a second motor, a third leg stage, 30kg more capacity, and a minimum height of 625mm — 110mm lower than the EF1 can reach. It is also the only desk under RM2,000 here offered with a 180cm top.
Best for: anyone who finds standard desks too high, and anyone running dual monitors.
E7 Pro — RM2,149
Dual motor, 3-stage legs, 660 to 1310mm, 200kg. The heavy-duty option. Fastest at 40mm/sec, the tallest maximum, and double the capacity of the E5. Unless you are loading it with a workstation tower, multiple arms and studio monitors, that capacity is more than most desks ever use.
Best for: heavy setups, tall users, and buyers who want the best frame regardless of price.
Side by side
| Essential EN1/E2 | E5 | EF1 Value | E7 Pro | |
|---|---|---|---|---|
| Motor | Single | Dual | Single | Dual |
| Leg stages | 2-stage | 3-stage | 2-stage | 3-stage |
| Height range | 740–1185mm | 625–1275mm | 735–1235mm | 660–1310mm |
| Lift speed | 15mm/s | 30mm/s | 25mm/s | 40mm/s |
| Weight capacity | 80kg | 100kg | 70kg | 200kg |
| Memory presets | 4 | 4 | 4 | 4 |
| Desktop widths | 120 / 150cm | 120 / 150 / 180cm | 120 / 150cm | 120 / 150 / 180cm |
| Price from | RM699 | RM1,299 | RM1,199 | RM2,149 |
Height range, to scale
Price and motor count are easy to compare. Height range is the specification buyers most often get wrong, so here it is on a true millimetre scale. The shaded band is the sitting range most people need.

Which one should you buy
- Smallest budget: Essential EN1/E2 at RM699.
- Best all-rounder: E5 at RM1,299. Dual motor and 3-stage legs for RM100 over the single-motor EF1.
- If standard desks feel too high: E5, which starts at 625mm.
- Heavy or tall setups: E7 Pro at RM2,149.
- Largest desktop: E5 or E7 Pro, both available at 180 x 75cm.
Browse the full range on our standing desks page.
Things worth knowing before you order
Warranty is tiered. Five years covers the frame, motor, controller and electronics. Leaving a photo review within two weeks extends that to seven years at no cost, and a RM280 add-on takes it to ten. The headline ten-year figure is not automatic.
Delivery depends on where you are. Free within Klang Valley and KL with our own team. Rest of West Malaysia goes by courier. Sabah and Sarawak go by sea freight and take three to six weeks.
Installation is extra. RM120 in KL, PJ or Penang, and it has to be selected before checkout. Self-assembly takes about an hour and is easier with two people, especially for a 180cm top.
Cable trays are not included. Budget for a Cable Management Tray or a Cable Spine if you want cables off the floor.
Frequently asked questions
How much should I spend on a standing desk in Malaysia?
RM699 buys a working electric sit-stand desk. Around RM1,300 buys a dual-motor 3-stage frame that is faster, steadier and adjusts across a wider range. Above RM2,000 you are paying for capacity and speed that most desk setups never use.
Is a dual motor desk worth the extra money?
If you run more than one monitor, yes. Two motors keep the top level under an uneven load and lift more weight. On the E5 the step up from the single-motor EF1 is RM100, which is the easiest upgrade decision in the range.
Do these desks work on Malaysian power?
Yes. All are supplied for 240V with a Malaysian three-pin plug.
Can I try one before buying?
Yes. Our showrooms in Sungai Buloh, Selangor and Batu Kawan, Penang have the range set up at working height.

















